BEGIN:VCALENDAR
VERSION:2.0
PRODID:-//FabLab - ECPv6.15.20//NONSGML v1.0//EN
CALSCALE:GREGORIAN
METHOD:PUBLISH
X-ORIGINAL-URL:https://www.lakeshorefablab.com
X-WR-CALDESC:Events for FabLab
REFRESH-INTERVAL;VALUE=DURATION:PT1H
X-Robots-Tag:noindex
X-PUBLISHED-TTL:PT1H
BEGIN:VTIMEZONE
TZID:America/Detroit
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20200308T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20201101T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20210314T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20211107T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20220313T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20221106T060000
END:STANDARD
BEGIN:DAYLIGHT
TZOFFSETFROM:-0500
TZOFFSETTO:-0400
TZNAME:EDT
DTSTART:20230312T070000
END:DAYLIGHT
BEGIN:STANDARD
TZOFFSETFROM:-0400
TZOFFSETTO:-0500
TZNAME:EST
DTSTART:20231105T060000
END:STANDARD
END:VTIMEZONE
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210609T180000
DTEND;TZID=America/Detroit:20210609T193000
DTSTAMP:20260414T201957
CREATED:20210607T192704Z
LAST-MODIFIED:20210607T193214Z
UID:2487-1623261600-1623267000@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop
DESCRIPTION:Come learn about 3D printing! We can cover both basic or advanced topics! \nWe will try to pick out a few prints based on any holidays for you to choose from. The prints will most likely NOT be done during the time of this workshop since 3D printing can take a long time! You will have to come back for the 3D printed files another day. \n—————————————————————————————————— \nMCC is in PHASE 4 of its Re-opening plans. This means restrictions are in place for our events. \nThis should go without saying but please do not come in if you are experiencing symptoms of COVID19 or have a potential exposure.  \nWhen you come in you will be required to fill out a COVID19 screening form \n\nLimited Capacity: Unfortunately for now we have to limit the number of people inside the fab lab\nAge: Only those 16+ are able to come into the fab lab right now\nMasks: Vaccinated or not\, for now you have to wear a mask. Let’s hope we can all breathe free soon enough!\nSocial Distancing: we all unfortunately know too much about these 2 words but when possible let’s keep some distance between bodies\nSanitizing: MCC staff will sanitize high traffic work surfaces and equipment. Hand sanitizer will be available inside and outside of the fab lab\n\nIf you are not eligible to come in right now we are still able to offer Curbside Services to help you out. \nFor more information on Muskegon Community College’s Re-Opening status and more detailed information please visit their Dashboard here. \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/05/3d-printing-workshop-e1626272456904.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210610T180000
DTEND;TZID=America/Detroit:20210610T200000
DTSTAMP:20260414T201957
CREATED:20210607T195422Z
LAST-MODIFIED:20210607T195422Z
UID:2744-1623348000-1623355200@www.lakeshorefablab.com
SUMMARY:Laser Engraving Workshop - Living Hinge Keepsake Box
DESCRIPTION:Come learn about laser engraving! \nWe will show you the basics of the laser engraver/cutter and you will make a living hinge box customized for you or as a gift for someone else! \n—————————————————————————————————— \nMCC is in PHASE 4 of its Re-opening plans. This means restrictions are in place for our events. \nThis should go without saying but please do not come in if you are experiencing symptoms of COVID19 or have a potential exposure.  \nWhen you come in you will be required to fill out a COVID19 screening form \n\nLimited Capacity: Unfortunately for now we have to limit the number of people inside the fab lab\nAge: Only those 16+ are able to come into the fab lab right now\nMasks: Vaccinated or not\, for now you have to wear a mask. Let’s hope we can all breathe free soon enough!\nSocial Distancing: we all unfortunately know too much about these 2 words but when possible let’s keep some distance between bodies\nSanitizing: MCC staff will sanitize high traffic work surfaces and equipment. Hand sanitizer will be available inside and outside of the fab lab\n\nIf you are not eligible to come in right now we are still able to offer Curbside Services to help you out. \nFor more information on Muskegon Community College’s Re-Opening status and more detailed information please visit their Dashboard here. \n 
URL:https://www.lakeshorefablab.com/event/laser-engraving-workshop-living-hinge-keepsake-box/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/05/3d-printing-workshop-e1626272456904.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210623T180000
DTEND;TZID=America/Detroit:20210623T193000
DTSTAMP:20260414T201957
CREATED:20210607T194313Z
LAST-MODIFIED:20210607T194313Z
UID:2743-1624471200-1624476600@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop
DESCRIPTION:Come learn about 3D printing! We can cover both basic or advanced topics! \nWe will try to pick out a few prints based on any holidays for you to choose from. The prints will most likely NOT be done during the time of this workshop since 3D printing can take a long time! You will have to come back for the 3D printed files another day. \n—————————————————————————————————— \nMCC is in PHASE 4 of its Re-opening plans. This means restrictions are in place for our events. \nThis should go without saying but please do not come in if you are experiencing symptoms of COVID19 or have a potential exposure.  \nWhen you come in you will be required to fill out a COVID19 screening form \n\nLimited Capacity: Unfortunately for now we have to limit the number of people inside the fab lab\nAge: Only those 16+ are able to come into the fab lab right now\nMasks: Vaccinated or not\, for now you have to wear a mask. Let’s hope we can all breathe free soon enough!\nSocial Distancing: we all unfortunately know too much about these 2 words but when possible let’s keep some distance between bodies\nSanitizing: MCC staff will sanitize high traffic work surfaces and equipment. Hand sanitizer will be available inside and outside of the fab lab\n\nIf you are not eligible to come in right now we are still able to offer Curbside Services to help you out. \nFor more information on Muskegon Community College’s Re-Opening status and more detailed information please visit their Dashboard here. \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/05/3d-printing-workshop-e1626272456904.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210701T160000
DTEND;TZID=America/Detroit:20210701T190000
DTSTAMP:20260414T201957
CREATED:20210630T183611Z
LAST-MODIFIED:20210630T203410Z
UID:2817-1625155200-1625166000@www.lakeshorefablab.com
SUMMARY:Laser Engraved Patriotic Glass & Sticker Pack
DESCRIPTION:This impromptu event will go from 4-7pm! \nTickets are $10 and this includes a design of your choice (we have some cool Patriotic ones to choose from!) or you could do something else (pending approval from fab lab workers). \nWe have a limited amount of Pint Glasses and Beer Mugs onsite. Purchasing a ticket guarantees you get one! If you want to bring your own glass you can and it will be subject to the fab lab team if it is possible to engrave. \n  \nEach participant will get a Patriotic sticker pack as well! \nThis event is for all ages! \nCan purchase additional tickets on site (cards only\, no cash) or pre-register the desired quantity. \n  \n 
URL:https://www.lakeshorefablab.com/event/laser-engraved-patriotic-glass-sticker-pack-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/06/2021-july-4th-fab-lab-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210721T180000
DTEND;TZID=America/Detroit:20210721T190000
DTSTAMP:20260414T201957
CREATED:20210714T142350Z
LAST-MODIFIED:20210715T170608Z
UID:2886-1626890400-1626894000@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop/Meetup
DESCRIPTION:Come learn about 3D printing at this workshop/meetup. Bring your questions about the technology and we will try to answer them! If you have a cool project you have been working on making\, bring it in for a show and tell! \nWe will cover the basics of the FDM (filament based) technologies. \nAll attendees will receive a 3D printed Fidget Star (trust me they are fun). \n  \nMembers: FREE\n \nNon-Members: $10 \n  \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop-meetup/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/3d-printing-workshop-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210804T180000
DTEND;TZID=America/Detroit:20210804T190000
DTSTAMP:20260414T201957
CREATED:20210714T142527Z
LAST-MODIFIED:20210715T170524Z
UID:2892-1628100000-1628103600@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop/Meetup
DESCRIPTION:Come learn about 3D printing at this workshop/meetup. Bring your questions about the technology and we will try to answer them! If you have a cool project you have been working on making\, bring it in for a show and tell! \nWe will cover the basics of the FDM (filament based) technologies. \nAll attendees will receive a 3D printed Fidget Star (trust me they are fun). \n  \nMembers: FREE\n \nNon-Members: $10 \n  \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop-meetup-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/3d-printing-workshop-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210807T100000
DTEND;TZID=America/Detroit:20210807T120000
DTSTAMP:20260414T201957
CREATED:20210728T202257Z
LAST-MODIFIED:20210728T211939Z
UID:2920-1628330400-1628337600@www.lakeshorefablab.com
SUMMARY:WELCOME Sign For Your House or Wall Stickers (Saturday Series)
DESCRIPTION:Custom make a 4ft x 10inch sign to place at your front door. WELCOME or any other word up to 10 letters. \n  \nFor the kids\, or a big kid: \nDoor or Wall Vinyl Sticker \nPrint your name\, create a sticker of your favorite hobby\, superhero\, etc. Total material use is 2ft x 2ft so you can print 1 big sticker or a bunch of smaller ones. \n  \n 
URL:https://www.lakeshorefablab.com/event/welcome-sign-for-your-house-or-wall-stickers/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210811T160000
DTEND;TZID=America/Detroit:20210811T180000
DTSTAMP:20260414T201957
CREATED:20210729T201554Z
LAST-MODIFIED:20210729T201554Z
UID:2963-1628697600-1628704800@www.lakeshorefablab.com
SUMMARY:Design a game character and 3D print it!
DESCRIPTION:Come learn how to get started with character/creature design from Lori Hazelton. Lori studied game and graphic design at MCC and loves being involved with the fab lab. She will guide you through using Sculptris to create a character/creature from your imagination! \nAfter the design is done we will set your creations up to be 3D printed. You will have to come back in a day or 2 for the final 3D printed files\, as they can take some time to complete. \nSculptris is a free program! Learn more here: https://sculptris.en.softonic.com/
URL:https://www.lakeshorefablab.com/event/design-a-game-character-and-3d-print-it/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/jpeg:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/0ade1735557c850c5d4c44e9d05c2c9bdca5b10f.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20210814
DTEND;VALUE=DATE:20210816
DTSTAMP:20260414T201957
CREATED:20210728T230608Z
LAST-MODIFIED:20210728T230641Z
UID:2943-1628899200-1629071999@www.lakeshorefablab.com
SUMMARY:FAB LAB CLOSED
DESCRIPTION:Due to a scheduled power outage the fab lab will be closed August 14.
URL:https://www.lakeshorefablab.com/event/fab-lab-closed/
LOCATION:MI
CATEGORIES:ALERT
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210818T180000
DTEND;TZID=America/Detroit:20210818T190000
DTSTAMP:20260414T201957
CREATED:20210714T142639Z
LAST-MODIFIED:20210715T170348Z
UID:2895-1629309600-1629313200@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop/Meetup
DESCRIPTION:Come learn about 3D printing at this workshop/meetup. Bring your questions about the technology and we will try to answer them! If you have a cool project you have been working on making\, bring it in for a show and tell! \nWe will cover the basics of the FDM (filament based) technologies. \nAll attendees will receive a 3D printed Fidget Star (trust me they are fun). \n  \nMembers: FREE\n \nNon-Members: $10 \n  \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop-meetup-3/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/3d-printing-workshop-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210821T100000
DTEND;TZID=America/Detroit:20210821T120000
DTSTAMP:20260414T201957
CREATED:20210728T214544Z
LAST-MODIFIED:20210728T214544Z
UID:2929-1629540000-1629547200@www.lakeshorefablab.com
SUMMARY:Get Your GAME On! Go Sports! (Saturday Series)
DESCRIPTION:Custom design and make a metal sign (12″ x 12″)\, etch a glass (provided)\, and make a wooden key chain all with your favorite team(s) or players. \n  \nFor the kids\, or a big kid: \n3D Print and Team Logo Keychain:\n \n3D print something related to sports (or any small/reasonable item)\, and make a wooden key chain all with your favorite team(s) or players. \n  \nRESERVATIONS DUE BY 1 WEEK BEFORE CLASS SO WE CAN GET MATERIALS. \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/get-your-game-on-go-sports/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210825T160000
DTEND;TZID=America/Detroit:20210825T180000
DTSTAMP:20260414T201957
CREATED:20210729T202142Z
LAST-MODIFIED:20210729T202142Z
UID:2972-1629907200-1629914400@www.lakeshorefablab.com
SUMMARY:Sticker Design 101
DESCRIPTION:Come learn how to get started using Adobe Illustrator to create your very own stickers! Each participant will receive about 12inch x 12inch area worth of stickers. \nCome with some ideas of images or clipart that you would like to make 🙂 \nWe will be using Adobe Illustrator\, we recommend please create a FREE Adobe account for each attendee using this link\, https://account.adobe.com/ . This will help get the class going quicker! \n  \n 
URL:https://www.lakeshorefablab.com/event/sticker-design-101/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/Sticker-Design-101.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210828T100000
DTEND;TZID=America/Detroit:20210828T120000
DTSTAMP:20260414T201957
CREATED:20210728T222205Z
LAST-MODIFIED:20210728T225812Z
UID:2934-1630144800-1630152000@www.lakeshorefablab.com
SUMMARY:Are Your Ready to Tailgate??? (Saturday Series)
DESCRIPTION:Build your own custom full size cornhole game with personalized surfaces add your family name\, your favorite team\, or slogan. \nImages or text will be made on our large format vinyl printer. There will be a limit to the complexity we can do in the amount of time that we have. \nNOTE: Bags are NOT included. Also finishing (stain\, clear coat\, paint) is not included with this workshop. You can bring your own to work on here though.\n  \nFor the kids\, or a big kid: \nCustom Mini Cornhole Game:\n \n \nBuild your own custom mini cornhole game with personalized surfaces. Add your name\, favorite team\, or slogan. \n  \nNOTE: Bags are NOT included. Also finishing (stain\, clear coat\, paint) is not included with this workshop. You can bring your own to work on here though.\n  \nRESERVATIONS DUE BY 1 WEEK BEFORE CLASS SO WE CAN GET MATERIALS. \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/are-your-ready-to-tailgate/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20210903
DTEND;VALUE=DATE:20210914
DTSTAMP:20260414T201957
CREATED:20210728T230900Z
LAST-MODIFIED:20210728T230900Z
UID:2944-1630627200-1631577599@www.lakeshorefablab.com
SUMMARY:FAB LAB CLOSED
DESCRIPTION:From 9/3/21 to 9/13/21 the Lakeshore Fab Lab will be closed.
URL:https://www.lakeshorefablab.com/event/fab-lab-closed-2/
LOCATION:MI
CATEGORIES:ALERT
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210915T180000
DTEND;TZID=America/Detroit:20210915T190000
DTSTAMP:20260414T201957
CREATED:20210714T142840Z
LAST-MODIFIED:20210728T231047Z
UID:2898-1631728800-1631732400@www.lakeshorefablab.com
SUMMARY:3D Printing Workshop/Meetup
DESCRIPTION:Come learn about 3D printing at this workshop/meetup. Bring your questions about the technology and we will try to answer them! If you have a cool project you have been working on making\, bring it in for a show and tell! \nWe will cover the basics of the FDM (filament based) technologies. \nAll attendees will receive a 3D printed Fidget Star (trust me they are fun). \n  \nMembers: FREE\n \nNon-Members: $10 \n  \n 
URL:https://www.lakeshorefablab.com/event/3d-printing-workshop-meetup-4/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/3d-printing-workshop-1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210918T100000
DTEND;TZID=America/Detroit:20210918T120000
DTSTAMP:20260414T201957
CREATED:20210728T225622Z
LAST-MODIFIED:20210915T225157Z
UID:2939-1631959200-1631966400@www.lakeshorefablab.com
SUMMARY:Keys to the Fab Lab Kingdom (Saturday Series)
DESCRIPTION:Learn Computer Aided Design (CAD) and design a key chain to be laser engraved or 3D printed. \nThe program we will be using is Onshape.com please register an account before the workshop\, https://www.onshape.com/en/products/free \n  \nFor the kids\, or a big kid: \nTinkering in the Fab Lab:\n \nLearn TinkerCAD and tinker around the fab lab learning about the equipment. Design a custom 3D printable keychain. \nThe program we will be using is TinkerCAD.com please register an account before the workshop\, www.tinkercad.com\n \n  \nWalk-ins day of are not guaranteed space\n \n 
URL:https://www.lakeshorefablab.com/event/keys-to-the-fab-lab-kingdom/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20210925T093000
DTEND;TZID=America/Detroit:20210925T120000
DTSTAMP:20260414T201957
CREATED:20210729T172905Z
LAST-MODIFIED:20210921T150150Z
UID:2942-1632562200-1632571200@www.lakeshorefablab.com
SUMMARY:Season Decor - CNC Router Halloween Tombstone (Saturday Series)
DESCRIPTION:Come to the Lakeshore Fab Lab and create a custom graveyard tombstone for Halloween! The class will cover the barebone basics for operating the Shopbot CNC Router. We will go over the basic operations used in Vcarve Shopbot Edition to create this piece. After you have personalized your tombstone project in the software\, we will go into the shop and cut the signs out. This will involve basic CNC router operation.\n\nDue to time\, you will be limited in your design! We had one ambitious kid make a file that took 2 hours to cut once 🙂\n\nNOTE: This will not be an in-depth course on the CNC router.\n\nGUESTS (such as kids) – you are allowed to bring 1 or 2 guests to help with the project but only 1 registered and paid person per group will be guaranteed to received a tombstone.\n  \n  \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/season-decor-cnc-router-halloween-tombstone/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/Halloween-Tombstone-CNC-Router-Class.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211009T100000
DTEND;TZID=America/Detroit:20211009T120000
DTSTAMP:20260414T201957
CREATED:20210729T173929Z
LAST-MODIFIED:20211006T211605Z
UID:2947-1633773600-1633780800@www.lakeshorefablab.com
SUMMARY:Season Decor - Fall Decorations (Saturday Series)
DESCRIPTION:Custom design an acrylic or wood yard or wall sign. We will be mostly doing fall/Halloween styles.\n\nDue to time\, you will be limited in your design!\n\nWe will be using a website called https://template4me.com/ to create the signs. We have an account so no need to create one.\n\n\nGUESTS (such as kids) – you are allowed to bring 1 or 2 guests to help with the project but only 1 registered and paid person per group will be guaranteed to walk out with a project.\n  \n  \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/season-decor-fall-decorations-saturday-series/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211016T093000
DTEND;TZID=America/Detroit:20211016T120000
DTSTAMP:20260414T201957
CREATED:20210921T150407Z
LAST-MODIFIED:20210921T150557Z
UID:3215-1634376600-1634385600@www.lakeshorefablab.com
SUMMARY:Season Decor - CNC Router Halloween Tombstone
DESCRIPTION:Come to the Lakeshore Fab Lab and create a custom graveyard tombstone for Halloween! The class will cover the barebone basics for operating the Shopbot CNC Router. We will go over the basic operations used in Vcarve Shopbot Edition to create this piece. After you have personalized your tombstone project in the software\, we will go into the shop and cut the signs out. This will involve basic CNC router operation.\n\nDue to time\, you will be limited in your design! We had one ambitious kid make a file that took 2 hours to cut once 🙂\n\nNOTE: This will not be an in-depth course on the CNC router.\n\nGUESTS (such as kids) – you are allowed to bring 1 or 2 guests to help with the project but only 1 registered and paid person per group will be guaranteed to received a tombstone.\n  \n  \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/season-decor-cnc-router-halloween-tombstone-saturday-series/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/Halloween-Tombstone-CNC-Router-Class.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211021T170000
DTEND;TZID=America/Detroit:20211021T193000
DTSTAMP:20260414T201957
CREATED:20210923T215345Z
LAST-MODIFIED:20210924T170153Z
UID:3219-1634835600-1634844600@www.lakeshorefablab.com
SUMMARY:Season Decor - CNC Router Halloween Tombstone
DESCRIPTION:Come to the Lakeshore Fab Lab and create a custom graveyard tombstone for Halloween! The class will cover the barebone basics for operating the Shopbot CNC Router. We will go over the basic operations used in Vcarve Shopbot Edition to create this piece. After you have personalized your tombstone project in the software\, we will go into the shop and cut the signs out. This will involve basic CNC router operation.\n\nDue to time\, you will be limited in your design! We had one ambitious kid make a file that took 2 hours to cut once 🙂\n\nNOTE: This will not be an in-depth course on the CNC router.\n\nGUESTS (such as kids) – you are allowed to bring 1 or 2 guests to help with the project but only 1 registered and paid person per group will be guaranteed to received a tombstone.\n  \n  \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/season-decor-cnc-router-halloween-tombstone-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/Halloween-Tombstone-CNC-Router-Class.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211023T100000
DTEND;TZID=America/Detroit:20211023T120000
DTSTAMP:20260414T201957
CREATED:20210729T181116Z
LAST-MODIFIED:20210729T181116Z
UID:2950-1634983200-1634990400@www.lakeshorefablab.com
SUMMARY:Are you a Murderino? Podcast Fan Art! (Saturday Series)
DESCRIPTION:Design and make your own swag from your favorite podcasts! You can make a shirt\, stickers\, and even laser etch a glass/tumbler with images or slogans from your favorite podcast!\n\nSo come and make some swag from your favorite podcasts\, talk with other podcast enthusiasts about your favorites and maybe find a new favorite podcast! \nT-shirts and glasses not included in the price. \n  \nIt is recommended that you bring your own shirt that is the color and size you want. We recommend Michael’s or Hobby Lobby to find shirts. \nIt is recommended that you bring your own glass\, use simple pint glasses please. \nWe will have some shirts and glasses here for purchase but cannot guarantee we have the color or size you would want. \n  \nRESERVATIONS DUE BY 1 WEEK BEFORE CLASS\n \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/are-you-a-murderino-podcast-fan-art/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211028T173000
DTEND;TZID=America/Detroit:20211028T200000
DTSTAMP:20260414T201957
CREATED:20211026T153847Z
LAST-MODIFIED:20211027T165537Z
UID:3269-1635442200-1635451200@www.lakeshorefablab.com
SUMMARY:Season Decor - CNC Router Halloween Tombstone
DESCRIPTION:Come to the Lakeshore Fab Lab and create a custom graveyard tombstone for Halloween! The class will cover the barebone basics for operating the Shopbot CNC Router. We will go over the basic operations used in Vcarve Shopbot Edition to create this piece. After you have personalized your tombstone project in the software\, we will go into the shop and cut the signs out. This will involve basic CNC router operation.\n\nDue to time\, you will be limited in your design! We had one ambitious kid make a file that took 2 hours to cut once 🙂\n\nNOTE: This will not be an in-depth course on the CNC router.\n\nGUESTS (such as kids) – you are allowed to bring 1 or 2 guests to help with the project but only 1 registered and paid person per group will be guaranteed to received a tombstone.\n  \n  \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/season-decor-cnc-router-halloween-tombstone-3/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/Halloween-Tombstone-CNC-Router-Class.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211106T100000
DTEND;TZID=America/Detroit:20211106T120000
DTSTAMP:20260414T201957
CREATED:20210729T182133Z
LAST-MODIFIED:20210729T182133Z
UID:2954-1636192800-1636200000@www.lakeshorefablab.com
SUMMARY:Who is your fav superhero? (Saturday Series)
DESCRIPTION:Design and make your own swag of your favorite superheroes (or villains) we don’t judge! Come learn how to make a t-shirt\, make a wall sticker and laser etch a keychain of your favorite superhero!\nT-shirts not included in the price. \n  \nKids or a big kid: \nDesign and make your own swag of your favorite superheroes (or villains) we don’t judge! Come learn how to make a t-shirt\, make a wall sticker and 3D print of your favorite superhero!\nT-shirts not included in the price. \n  \nIt is recommended that you bring your own shirt that is the color and size you want. We recommend Michael’s or Hobby Lobby to find shirts. \nWe will have some shirts here for purchase but cannot guarantee we have the color or size you would want. \n  \nRESERVATIONS DUE BY 1 WEEK BEFORE CLASS\n \nWalk-ins day of are not guaranteed materials. We will try to have extra items if we can. \n 
URL:https://www.lakeshorefablab.com/event/who-is-your-fav-superhero/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211120T100000
DTEND;TZID=America/Detroit:20211120T120000
DTSTAMP:20260414T201957
CREATED:20210729T182659Z
LAST-MODIFIED:20211105T204152Z
UID:2958-1637402400-1637409600@www.lakeshorefablab.com
SUMMARY:Custom etch a tumbler! (Saturday Series)
DESCRIPTION:Bring in your own tumbler and custom etch a name or logo on the container. Fill with coffee/tea/cocoa to make a great gift! \nTumblers are not included! You can sign up for multiple tickets if you have multiple tumblers that you want engraved. \nUPDATE: We now do have tumblers for sale in our ‘fab lab store’. We have black\, pink\, purple\, and red ones. We cannot guarantee colors for the event though! These are available for $6/each.
URL:https://www.lakeshorefablab.com/event/custom-etch-a-tumbler/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/07/2021-Saturday-Series-Fab-Lab-Classes-e1642792846648.png
END:VEVENT
BEGIN:VEVENT
DTSTART;VALUE=DATE:20211122
DTEND;VALUE=DATE:20211224
DTSTAMP:20260414T201957
CREATED:20211122T212342Z
LAST-MODIFIED:20211124T195735Z
UID:3359-1637539200-1640303999@www.lakeshorefablab.com
SUMMARY:Holi-DIY
DESCRIPTION:For the entire month of December we are focusing on helping you get your Holiday gift shopping done! We want you to WOW anyone you give a gift to with some incredible things made right here at the Lakeshore Fab Lab. \nIf you are NOT a fab lab member\, this event is for you! It will get you in the door for the month of December! \n  \nHoli-DIY @ Lakeshore Fab Lab \n \nHere are some ideas with estimated project cost: \nLaser Engraving Projects \n\nCustom Christmas Ornament(s) (about $10)\nLiving Hinge Box (about $20)\nLiving Hinge Clutch Bag (about $20)\nPint and wine glasses (about $10)\nWine box with living hinge (about $30)\nTumblers (similar to Yeti) (about $10)\nBeard Combs (about $10)\nEngrave a family picture or family pet! (about $30)\nCustomize a wooden frame and put a favorite memory in it as a heartfelt gift (about $25)\nHave a furry friend in your life? Make them a standing food and water bowl holder (about $40)\n\nCNC Router Projects \n\nCustom signs – maybe dad or grandpa needs a sign for their workshop???? (starting at $25)\nFunny sign + bottle opener (about $30)\nWooden 6 pack holder (about $70\, depends on current lumber prices)\nHeart shaped keepsake box\, custom engraved for your loved one (about $30)\nCustom flat pack stools (great for tailgating and camping) (about $50)\nHave a furry friend in your life? Make them a standing food and water bowl holder (about $40)\n\nPersonalized Items Using Our New Sublimation Printer \n\nCustom Coffee Mugs (full color) (about $12)\nCustom shirts\, hoodies\, towels\, pillow cases and more (starting at $10)\n\n* FYI the sublimation process limits what materials and colors of items you can personalize. Fabric needs to be 60% polyester and needs to be light colored to work with the sublimation process \nVinyl Printing\n \n\nMake custom stickers that are tailored towards your giftee\nPrint off full color\, high resolution photos\nCreate custom bumper stickers\nDress to impress – make yourself a fun holiday themed shirt or make one for others\n\n3D Printing Gifts \n\nCustom ornaments and holiday decor\nMake your white elephant gifting party fun by impressing everyone with a 3D printed gift\n\nThese are all just ideas to get your creative juices flowing! You can bring your own ideas! \nOnce you buy a ticket\, GO HERE to schedule your Orientation at the Fab Lab. We will have you sign some waivers\, get you and ID badge\, give you a safety tour and talk about your gift ambitions 🙂\nWe close on 12/23/2021 at 7pm so don’t delay!
URL:https://www.lakeshorefablab.com/event/holi-diy/
LOCATION:MI
CATEGORIES:On Site
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/11/Holi-DIY1.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211211T100000
DTEND;TZID=America/Detroit:20211211T120000
DTSTAMP:20260414T201957
CREATED:20211203T194255Z
LAST-MODIFIED:20211203T194319Z
UID:3462-1639216800-1639224000@www.lakeshorefablab.com
SUMMARY:Custom Laser Cut Ornaments
DESCRIPTION:Join us in this Laser Engraving workshop as we walk you through designing a custom ornament! \nEach participant will be able to make up to 2 ornaments. \nYou can attend this workshop with a guest. So bring your kids\, bring your friend\, bring your significant other! Only paid participants will leave with ornaments. \nSome examples to get the creative juices flowing! \n    \n 
URL:https://www.lakeshorefablab.com/event/custom-laser-cut-ornaments-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/jpeg:https://www.lakeshorefablab.com/wp-content/uploads/2021/12/1ff6cea0b3ec8f272b02c4705922a7a3.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211214T173000
DTEND;TZID=America/Detroit:20211214T200000
DTSTAMP:20260414T201957
CREATED:20211105T203906Z
LAST-MODIFIED:20211203T192024Z
UID:3326-1639503000-1639512000@www.lakeshorefablab.com
SUMMARY:Signs on the CNC Router
DESCRIPTION:Join us in this CNC Router workshop and learn the basics of making wooden signs on our Shopbot Router. Your sign can be Holiday themed or something else that you may have in mind. You could ALSO make a sign as a gift for someone for the Holidays! \nThere will be a limit to the complexity and size of the projects for timing purposes. Signs will be about 10″ x 10″. \nYou can attend this workshop with a guest. So bring your kids\, bring your friend\, bring your significant other! Only paid participants will make a sign. \nSome examples to get the creative juices flowing!
URL:https://www.lakeshorefablab.com/event/signs-on-the-cnc-router/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2021/11/2021-12-03-11_19_21-cnc-router-holiday-signs-Google-Search.png
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211221T170000
DTEND;TZID=America/Detroit:20211221T190000
DTSTAMP:20260414T201957
CREATED:20211203T194221Z
LAST-MODIFIED:20211203T194221Z
UID:3464-1640106000-1640113200@www.lakeshorefablab.com
SUMMARY:Custom Laser Cut Ornaments
DESCRIPTION:Join us in this Laser Engraving workshop as we walk you through designing a custom ornament! \nEach participant will be able to make up to 2 ornaments. \nYou can attend this workshop with a guest. So bring your kids\, bring your friend\, bring your significant other! Only paid participants will leave with ornaments. \nSome examples to get the creative juices flowing! \n    \n 
URL:https://www.lakeshorefablab.com/event/custom-laser-cut-ornaments/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/jpeg:https://www.lakeshorefablab.com/wp-content/uploads/2021/12/1ff6cea0b3ec8f272b02c4705922a7a3.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20211223T170000
DTEND;TZID=America/Detroit:20211223T190000
DTSTAMP:20260414T201957
CREATED:20211203T195839Z
LAST-MODIFIED:20211203T200334Z
UID:3470-1640278800-1640286000@www.lakeshorefablab.com
SUMMARY:Personalize a Coffee Mug with Sublimation!
DESCRIPTION:Our new Sawgrass Dye Sublimation printer is setup and ready to make custom coffee mugs for you! This printer is AWESOME! You can do full color photos right onto the mugs! \nEach participant will get 1 mug! Buy additional tickets for multiple mugs! \nYou can attend this workshop with a guest. So bring your kids\, bring your friend\, bring your significant other! Only paid participants will leave with a project. \nSome examples to get the creative juices flowing! \n \n 
URL:https://www.lakeshorefablab.com/event/personalize-a-coffee-mug-with-sublimation-2/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/jpeg:https://www.lakeshorefablab.com/wp-content/uploads/2021/12/20211124_174848.jpg
END:VEVENT
BEGIN:VEVENT
DTSTART;TZID=America/Detroit:20220205T090000
DTEND;TZID=America/Detroit:20220205T110000
DTSTAMP:20260414T201957
CREATED:20220120T211209Z
LAST-MODIFIED:20220201T232007Z
UID:3592-1644051600-1644058800@www.lakeshorefablab.com
SUMMARY:Heart Shaped Wooden Keepsake Box - Saturday Series
DESCRIPTION:Create a custom engraved heart shaped wooden box with the top etched with words\, images\, or dates. \nIn this workshop you will learn about the basics of our CNC Router and our Laser Cutter/Engraver and you will walk away with your own customized heart shaped keepsake box! \n  \nIf you cannot attend the event but are interested in purchasing a keepsake box\, you can place your order here. \nOrders must be placed by 2/8/2022 and you can pickup your boxes by 2/12/2022
URL:https://www.lakeshorefablab.com/event/heart-shaped-wooden-keepsake-box-saturday-series/
LOCATION:Lakeshore Fab Lab\, Lakeshore\, 388 W Clay Ave\, Muskegon\, MI\, 49440\, United States
CATEGORIES:Equipment,On Site,Project
ATTACH;FMTTYPE=image/png:https://www.lakeshorefablab.com/wp-content/uploads/2022/01/Saturday-Series-e1642716926813.png
END:VEVENT
END:VCALENDAR